pillow cover home decor Longarm Quilting Tip- Thread Tension decorative pillow shams

 pillow cover home decor     |      2020-03-31 12:47

Tension?shouldn’;t cause tension!

I cannot tolerate those tension headaches that have crept up on me when I couldn’;t get the tension to where I needed it to be. Over the past 14 years I have had ample time to discover how to become a bit more proactive and prevent those painful disturbances from taking over my day. Regardless of whether the time spent sewing is being done on a domestic sewing machine or the longarm; whether we are sitting or standing at our machine the last obstacle we want to encounter is tension issues.

personalized gifts for kids

Stitches are supposed to interlock in the batting of a quilt. If you notice your bobbin thread on the top, you will need to loosen your top tension. If you observe top thread on the bottom, you will need to tighten your top tension. I know this sounds so simple; but when this particular situation strikes it doesn’;t necessarily go that smoothly or easily.

I have provided two examples of the tension appearing too tight on top. The picture above displays the black thread in between the white thread. The photograph below it depicts extreme tension issues. If you run into this issue, remove the stitches by simply completing a little snip and pull action. Nowpillow cover home decor, if we were looking at the bottom of the quilt, it would be the opposite. We would actually need to tighten the top tension. Once we find the right location, BERNINA makes it very easy for us to adjust our tension. Pinpointing the exact location, easy peasy, ?just remember the number. Going up in numbers will tighten your top tension, and lowering your number loosens your top tension. Easy math right?

When I am presented with a tension issue I immediately take a deep breath. Allowing myself to get all worked up is not going to make things any easier. Ask yourself if you changed thread? Either bobbin thread or top thread? If that is the case perhaps you need to adjust the tension to compensate for a different thread. So what do we check for when we have tried to adjust the tension and we are still having problems?

Step 1: ?Change your needle! Believe it or not sometimes you just need a new needle. If that doesn’;t resolve the problem there is a chance that it is the size needle being used. I like to use an embroidery needle 90/14 for most of my quilting. There are occasions when needing either a smaller or larger needle become apparent. It doesn’;t hurt to experiment with both and see if one produce positive results.

Step 2: ?Examine your bobbin case. Sometimes a buildup of lint can hide in your bobbin case.?Even under the arm. This can cause major tension headaches. You can use a little canned air to clean out the bobbin.?If you are doing this it is then a perfect time to give your bobbin area a thorough cleaning. A soft paint brush is a great tool to help assist in clearing the lint. Since you’;re giving your bobbin case a little TLC applying a little dab of oil to your machine wouldn’;t hurt either. Maintaining your machine properly is important, the better taken care of it is the better it will perform.

Step 3: ?Have you recently dropped your bobbin case on the floor? Getting banged up from accidentally falls can really affect your bobbin case. If you recall collecting your bobbin case from the studio floor you might want to consider replacing it with a new one.

Step 4: ?Check the bobbin. Perhaps your bobbin is wound incorrectly.

Step 5: ?Re-thread the machine. Yes, sometimes it is that easy.

Step 6: ?There are times when your bobbin tension could be off.?Did you recently switch to a heavier thread in the bobbin??Grab your BERNINA Tension gauge!?Sometimes I run my thread a little looser if I am having issues with breakage, which is rare.

Step 7: ?Contemplate choosing a different thread. The thread could very well be the problem. Using a high quality thread makes a huge difference. If your thread is old, this could be another problem.

Step 8: ?Walk away from the entire situation. There have been numerous times I have had been confronted with tension challenges and chose to not let frustration take over my day. I removed myself from my studio and then attacked the matter the next day. And then it worked perfectly!

Tension doesn’;t have to cause tension in us quilters. No, it’;s definitely not something we want to execute on a consistant basis. However, I am hoping that if you methodically work through the checklist I have shared you’;ll?quickly find the source of your sewing tension!

My dear friends Gretchen & Natalie of Lulubelles have taken the plunge and are going to host a creative event in the Louisville area!

From the creation of our company in 1967 by visionary, Claudio Alcorso, Sheridan has a rich and celebrated history with artists and creatives. Each season, our iconic art beds carry on this tradition by bringing beautiful art into the bedroom.

You can never have too many zippered pouches! Small or big, they can hold anything. Celebrate their usefulness from the ground up: Use fabric selvage strips from past projects to make the fabric to make the pouch. You can relive the love of those past projects every time you pull it out.